Proje Antalya services
Renovation, renewal, maintenance and technical work in Antalya
Renewing a home, villa, office or commercial space may need one trade, or several that depend on each other. From planning to strip-out, plumbing, electrics, finishes, joinery, survey and maintenance, you can review the work types we actually publish in one structure.
If you already know the job, go straight to that service. If several trades are involved, choose a project path so scope, dependencies and sequence stay together.
Projects that need more than one service
Some jobs finish with a single trade. Others share the same survey, services and sequence. The paths below help you pick the outcome before the service name.
- Whole apartment or villa renewalPlan design, strip-out, services, finishes and fitted work under one scope.
- Kitchen and bathroom conversionKeep plumbing, electrics, waterproofing, tiling, lighting, worktops and cabinets on the same measure and sequence.
- From the source of the problem to the recovered surfaceDo not only cover the stain. Put diagnosis, leak or waterproofing, drying and finish repair in the right order.
- Prepare an office, shop or commercial spaceCoordinate layout, MEP, finishes and fitted furniture around the opening target.
- Renew and follow a distant propertyKeep approval, progress records, changes, maintenance and handover on a verified reporting path.
- Planned maintenance and small worksManage one-off tasks and periodic checks with a defined scope and close-out record.
All services
Services are grouped in three lines so you can see how a project moves and how trades relate. Every published service goes to its own page. Unpublished work types are described inside the category; there are no invented pages or placeholder cards.
Plan and transform
Renovation and coordinated conversion
Covers multi-trade renewal of apartments, villas, bathrooms, kitchens, offices, shops, restaurants and hotels. “Turnkey” is used only when inclusions, exclusions, change control, tests and handover criteria are explicit.
- Apartment and house
- Villa
- Bathroom
- Kitchen
Homes and living spaces
Architecture, planning and project management
Runs from the brief and measured survey through design, budget, permit coordination and site direction. It helps make scope, decisions, deliverables and trade interfaces visible before work starts.
- Measured survey
- Concept
- Technical drawings
- Quantities and budget
- Project management
Demolition, shell and structural work
Covers selective strip-out, demolition, excavation, concrete and masonry, plus designed structural work. Where the frame, permits, waste or safety are involved, the first step is the correct technical and authorised path, not a blanket promise to start.
- Selective strip-out
- Excavation
- Reinforced concrete
- Structural review
Find specialist trades
Finishes, surfaces and waterproofing
Covers plaster, plasterboard, ceilings, paint, tile, stone, floors and waterproofing, including the layers behind the visible finish. Cosmetic cover is not offered while damp, water, cracks or substrate issues remain unresolved.
- Plaster and plasterboard
- Paint
- Tiling
- Waterproofing
Walls, ceilings and paint
Water, mechanical services and climate
Covers potable and waste plumbing, fittings, leaks and blockages, heating, cooling, ventilation, pumps and related mechanical systems. Installation, diagnosis, physical repair, maintenance and formal acceptance are kept as distinct jobs.
- Plumbing
- Leak detection
- Air conditioning
- Heating
Water, drainage and sanitary systems
Electrics, extra-low voltage, energy and smart systems
Runs from wiring and boards to lighting, data, cameras, door phones, backup power, EV charging and automation. Where life safety, privacy, cyber handover, testing or licences apply, scope and responsible role stay explicit.
- Internal wiring
- Distribution boards
- Lighting
- Data and CCTV
Furniture, joinery, glass and shading
Covers made-to-measure kitchen and bathroom furniture, wardrobes, doors and windows, glass, shower enclosures, glass balconies, pergolas, awnings and related repair. Measure, shop drawing, product choice, fit and acceptance stay one chain.
- Kitchen cabinets
- Doors and windows
- Glass balcony
- Pergola
Survey, manage and protect the property
Maintenance, incident response and facilities
Covers planned maintenance, work orders, residential or commercial facilities, seasonal open-close, small repairs, handover readiness, cleaning, pool and garden tasks. “24/7” or same-day response is said only when shift, coverage and response evidence exists.
- Planned maintenance
- Small repairs
- Seasonal opening
- Facilities upkeep
How several services join in one project
On a renovation, trades do not merely sit side by side; they change each other’s inputs and timing. Survey and design set plumbing and electrical points, concealed tests set when finishes can close, and finished thicknesses set joinery production. Multi-trade work therefore needs a shared scope, dependency and acceptance plan.
Kitchen cabinet production is not only a room size. Appliance positions, water and waste points, electrical loads, lighting, wall finish thickness and worktop measure can all change the same production decision. Survey, services release and production approval are therefore separate control points.
- Understand and plan: brief, as-built, survey, design, scope and budget.
- Resolve concealed work: strip-out, structural decisions, water and electrics.
- Complete surface and product: waterproofing, plaster, paint, floors, furniture and glass.
- Test and hand over: concealed-work records, function tests, snag list, cleaning and open items.
Where should you start in which situation?
Layout, look or use of the space will change.
Start with renovation if several trades are involved; with planning if the job is still a brief.
Renovation servicesA single, named application is required.
Go to the specialist category; diagnose first if the cause is unclear.
All servicesThe structure, safety or a large demolition is involved.
Technical triage first. No application promise without authorised analysis and design.
Demolition and structureThere is a symptom but the source is unknown.
For water marks, damp or a suspected leak, detection and plumbing come before paint.
Leak detectionThe as-built state must be measured or evidenced.
Scope the survey need first. Official documents are not invented.
Describe the needThe property will be managed regularly or from afar.
Technical upkeep sits in maintenance. Estate representation stays closed until the legal model is ready.
Maintenance
Clarify scope before the service name
The same service name can mean different work on two projects. As-built condition, access, product grade, concealed work, permits and interfaces with other teams change the scope. Choosing the right service is therefore not only clicking a card; it is making the points below visible.
- Inclusions and exclusions: what will be done, and what belongs to another service or third party?
- Responsible roles: when is a tradesperson, architect, engineer, authorised service or licensed body required?
- Dependencies and sequence: which decision or test must finish before the next job can start?
- Evidence and acceptance: which records — measure, photo, test, sample, snag list or as-built — will be produced?
- Capacity: in which area, hours and language is real contact and delivery actually available?
In Antalya the project context chooses the service
Coastal exposure, sun and UV, heat, humidity, sudden rain, outdoor use and the peak season can affect façade, waterproofing, joinery, shading, mechanical systems and maintenance. Access, shared areas, operating continuity and permits also differ between villa, apartment, site, hotel and commercial space.
Local value does not come from repeating “Antalya” on every page. It comes from explaining the real building type, site condition, team capacity, coverage and ProjectCase evidence for that service.
- Muratpaşa
- Konyaaltı
- Kepez
- Lara
- Kundu
Frequently asked questions
What should I do if I do not know which service I need?
Share the outcome you want or the problem you see. After space type, as-built condition, location, photos and aim are reviewed, the need is split into design, diagnosis, a single application, multi-trade renovation or maintenance. First contact is not a binding diagnosis or price.
Can I take several services in one project?
Yes when the relevant capacity is verified. Plumbing, electrics, waterproofing, finishes and joinery that affect each other can be coordinated under one scope and sequence. Proje Antalya’s role, inclusions, exclusions and responsible applicators are stated again in the offer and contract.
Does turnkey renovation automatically include every trade?
No. “Turnkey” is not a scope by itself. Rooms, systems, products, design and permits, tests, cleaning and handover documents must be written. Vague “everything included” wording is not used.
Can I apply for a single small job?
Yes for published single services and small-repair scope that can be met in that area. If the job involves electrics, gas, structure, work at height or other high risk, the relevant expertise and licence gate applies.
Do you serve every district in Antalya?
Coverage can change with the job type, team capacity, project size, access and working hours. There is no general promise for every district. When location and need are shared, the current coverage record for that service is checked.
Can I get a price from the services page?
A catalogue does not produce a firm price. Price depends on as-built condition, measure, scope, products, access, permits, tests, duration and interfaces. If a price guide is published, date, assumptions and scope are shown.
Can I call a crew from this page in an emergency?
For life safety, fire, gas smell, utility failure or people trapped, follow the official emergency route first. Proje Antalya only shows a commercial contact path for technical incidents with verified hours, area and routing; 24/7 is not assumed.
Can I receive services in English, Russian or German?
A language option is published only when a real contact, scope text and route exist in that language for that service. A translated page does not by itself mean operational capacity in that language.
Let us settle where to start
Share the type of space, the area, the work you want and photos if you have them. We will route the request to the right category; if several trades are needed we will set the opening scope and sequence together.